View CartPRODUCT AREA: ALL
3/16" Holddown Clip |
|
|
Black nylon for a variety of uses, including brake lines fuel lines, wiring, etc. 8 pieces per package. Part Number: 3051c Weight: 1 lbs |
|
Price: $6.00 |
 Add To Cart
|
|
|
|
3/4" Holddown Clip |
|
|
Black nylon for a variety of uses, including brake lines fuel lines, wiring, etc. 8 pieces per package. Part Number: 3042e Weight: 1 lbs |
|
Price: $8.00 |
Add To Cart
|
|
|
|
3/8 Hold Down Clip |
|
|
Black nylon for a variety of uses, including brake lines fuel lines, wiring, etc. 8 pieces per package. Part Number: 3041c Weight: 1 lbs |
|
Price: $6.00 |
Add To Cart
|
|
|
|
'427' Mini Front section |
|
|
Front section of the mini '427' would look good hanging in the shop with a radio and speaker built in to it. Part Number: C2005MF Weight: 30 lbs |
|
Price: $125.00 |
Add To Cart
|
|
|
|
'427' Mini Hood |
|
|
'427' Mini Hood. This hood would look good hanging in the shop or office. Part Number: C2005MH Weight: 30 lbs |
|
Price: $89.00 |
Add To Cart
|
|
|
|
5 Bolt Rotors |
|
|
Original Mustang II dimensions except that these are a patented 5 bolt, 5 rib reinforced design. These vented rotors are the best in the market. Ford bolt pattern. Part Number: 4048f Weight: 14 lbs |
|
Price: $129.00 |
Add To Cart
|
|
|
|
5 Bolt Rotors |
|
|
Original Mustang II dimensions except that these are a patented 5 bolt, 5 rib reinforced design. These vented rotors are the best in the market. Chevy Bolt Pattern. Part Number: 4048c Weight: 14 lbs |
|
Price: $129.00 |
Add To Cart
|
|
|
|
Alignment Shims |
|
|
Fits 1/2" bolt, 5 pieces per box. 1/8" thickness. Part Number: 0021 Weight: 1 lbs |
|
Price: $8.00 |
Add To Cart
|
|
|
|
Aluminum Radiator |
|
|
High capacity aluminum radiator with 2 one-inch rows for superior cooling capability. Please specify Ford or Chevy in the comments section. Part Number: 3038al Weight: 30 lbs |
|
Price: $335.00 |
Add To Cart
|
|
|
|
Aluminum Trim Package |
|
|
High quality polished aluminum panels. Covers the footboxes and firewall for that show car look. Preformed panels fit SVC 427 replicas 1997 to present. Part Number: 410030AL Weight: 15 lbs |
|
Price: $395.00 |
Add To Cart
|
|
|
|
Ball Joint Mustang II O.E. Lower |
|
|
These ball joints are direct replacements for the original stamped Ford Mustang II Lower A-Arms Part Number: 40410el Weight: 1 lbs |
|
Price: $27.00 |
Add To Cart
|
|
|
|
Ball Joint Mustang II O.E. Upper |
|
|
This ball joint is a direct replacement for the original ball joint used in the stamped Mustang II upper A-Arm. Part Number: 40410eu Weight: 2 lbs |
|
Price: $27.00 |
Add To Cart
|
|
|
|
Ball Joint Recepticle |
|
|
Adapts to Mustang II spindle, can be used on upper or lower A-Arms (use part number 4041bj). Part Number: 4041r Weight: 1 lbs |
|
Price: $17.00 |
Add To Cart
|
|
|
|
Ball Joint Tubular Type |
|
|
This ball joint screws into all of Shell Valley Companies' tubular A-Arms. Part Number: 4041bj Weight: 1 lbs |
|
Price: $27.00 |
Add To Cart
|
|
|
|
Battery Installation Kit |
|
|
This kit comes with everything you need to mount your battery safely and all cables and hardware to make a professional hookup of your battery. Part Number: 1015K Weight: 6 lbs |
|
Price: $75.00 |
Add To Cart
|
|
|
|
Bearing and Seal Kit |
|
|
Fits Mustang II spindle and rotor. Complete as shown. Part Number: 4049 Weight: 1 lbs |
|
Price: $22.00 |
Add To Cart
|
|
|
|
Body Mounting Kit |
|
|
Body mounting kit has enough bolts to securely fasten the body down to the frame. Includes frame weatherstrip. Part Number: 8087 Weight: 1 lbs |
|
Price: $45.00 |
Add To Cart
|
|
|
|
Brake and Hydraulic Clutch Assembly |
|
|
Single 1" Master clyinder with fittings for front and rear. Clutch has master cylinder and adjustable pull type slave cylinder. Part Number: 3035bc Weight: 12 lbs |
|
Price: $480.00 |
Add To Cart
|
|
|
|
Brake Assembly |
|
|
Has GM master cylinder with 1" bore and dual ports for brake lines. comes with pedal pad. Part Number: 3035b Weight: 6 lbs |
|
Price: $285.00 |
Add To Cart
|
|
|
|
Brake Line Hose |
|
|
Junction block attaches from the frame to the rear end housing & T's out for each wheel cylinder. 3/16" hard brake lines are used at all junctions. Part Number: 5056 Weight: 1 lbs |
|
Price: $39.00 |
Add To Cart
|
|
|
|
Bumper Mounting Kit |
|
|
Includes correctly threaded tubing needed for front and rear bumpers. Bolts, studs, and grommets are included. Part Number: 8085 Weight: 8 lbs |
|
Price: $100.00 |
Add To Cart
|
|
|
|
Bumpers Overriders |
|
|
Stamped and polished stainless steel just like the originals. Threaded mounting plates allow quick assembly. Part Number: 9006 Weight: 4 lbs |
|
Price: $325.00 |
Add To Cart
|
|
|
|
Bushing O.E. A-Arm |
|
|
Replacement for both stamped upper and lower A-Arms. Part Number: 4041eb Weight: 3 lbs |
|
Price: $55.00 |
Add To Cart
|
|
|
|
Car Cover |
|
|
Protect your 427 replica from dust and dirt year-round. Made with a water-repellent yet breathable material. Includes a convenient storage pouch. Part Number: 2003 Weight: 10 lbs |
|
Price: $39.00 |
Add To Cart
|
|
|
|
Carbon Fiber Dash 427 Cobra Replica |
|
|
Dash for the 427 Replica car. Fiberglass with Carbon Fiber overlay. Part Number: C8081CF Weight: 30 lbs |
|
Price: $199.00 |
Add To Cart
|
|
|
|
Carbon Fiber Tall Hood Scoop |
|
|
Tall Hood scoop for the 427 Cobra Replica. With Carbon Fiber overlay. For those '427' that need a little more clearance. Part Number: C2004CFT Weight: 30 lbs |
|
Price: $199.00 |
Add To Cart
|
|
|
|
Chromed Roll Bar (single) |
|
|
Original design w/rear mounted third leg. Includes rubber body grommets and mounting brackets. 2" OD 12" center to center Part Number: 9017c Weight: 24 lbs |
|
Price: $425.00 |
Add To Cart
|
|
|
|
Cobra Replica Body |
|
|
427 S/C Cobra replica body. Made of a durable fiberglass/Kevlar hybird. Part Number: 7071F Weight: 200 lbs |
|
Price: $5,995.00 |
Add To Cart
|
|
|
|
Cobra Replica Frame |
|
|
Shell Valley uses 3/16" thick 2x4 rectangular tubing for construction of our frames. Using 60,000 lbs. minimum tensil strength steel, we don't just guess it's strong enough--We know it is! Part Number: 1011 Weight: 200 lbs |
|
Price: $2,995.00 |
Add To Cart
|
|
|
|
Cobra Replica Parts Catalog |
|
|
Order our catalog and receive a free gift certificate for $5 off of your next Shell Valley purchase. You can also now view our on-line price sheet!
|
|
Price: $5.00 |
Add To Cart
|
|
|
|
Coil Springs |
|
|
Closed and ground on top and bottom. Use on coilover shocks. All springs have 2 1/2" I.D. 10" Extended Length. 550 pound weight limit. Part Number: 4046f550 Weight: 8 lbs |
|
Price: $110.00 |
Add To Cart
|
|
|
|
Coil Springs |
|
|
Closed and ground on top and bottom. Use on coilover shocks. All springs have 2 1/2" I.D. 9 3/4" Extended Length. 180 pound weight limit. Part Number: 4046r180 Weight: 8 lbs |
|
Price: $110.00 |
Add To Cart
|
|
|
|
Coil Springs |
|
|
Closed and ground on top and bottom. Use on coilover shocks. All springs have 2 1/2" I.D. 9 3/4" Extended Length. 220 pound weight limit. Part Number: 4046r220 Weight: 8 lbs |
|
Price: $110.00 |
Add To Cart
|
|
|
|
Coil Springs |
|
|
Closed and ground on top and bottom. Use on coilover shocks. All springs have 2 1/2" I.D. 9 3/4" Extended Length. 250 pound weight limit. Part Number: 4046r250 Weight: 8 lbs |
|
Price: $110.00 |
Add To Cart
|
|
|
|
Coil Springs |
|
|
Closed and ground on top and bottom. Use on coilover shocks. All springs have 2 1/2" I.D. 10" Extended Length. 450 pound weight limit. Part Number: 4046f450 Weight: 8 lbs |
|
Price: $110.00 |
Add To Cart
|
|
|
|
Coil Springs |
|
|
Closed and ground on top and bottom. Use on coilover shocks. All springs have 2 1/2" I.D. 10" Extended Length. 350 pound weight limit. Part Number: 4046f350 Weight: 8 lbs |
|
Price: $110.00 |
Add To Cart
|
|
|
|
Coil Springs |
|
|
Closed and ground on top and bottom. Use on coilover shocks. All springs have 2 1/2" I.D. 9 3/4" Extended Length. 300 pound weight limit. Part Number: 4046r300 Weight: 8 lbs |
|
Price: $110.00 |
Add To Cart
|
|
|
|
Coilover Shocks Style C |
|
|
QA-1 Race proven aluminum ride height adjustable coil over shocks. These shocks will allow quick ride height settings. Simply screw the lower spring seat up or down for the desired height. No coil chopping. All aluminum body includes urethane bushings with 1/2" & 5/8" sleeves for top and bottom.
Part Number: 4046arc Weight: 8 lbs |
|
Price: $299.00 |
Add To Cart
|
|
|
|
Coilover Shocks Style S |
|
|
QA-1 Race proven aluminum ride height adjustable coil over shocks. These shocks will allow quick ride height settings. Simply screw the lower spring seat up or down for the desired height. No coil chopping. All aluminum body includes urethane bushings with 1/2" & 5/8" sleeves for bottom. With a stud mount top. Part Number: 4046afs Weight: 8 lbs |
|
Price: $299.00 |
Add To Cart
|
|
|
|
Cooper |
|
|
All season performance with superb traction. "T" speed rating good for sustained speeds of 118 mph. Part Number: wheel02 Weight: 120 lbs |
|
Price: $610.00 |
Add To Cart
|
|
|
|
Cross-Shaft Assembly |
|
|
Build your own upper A-Arms using this cross shaft complete with bushings & weld sleeves. Mustang II 5" bold centers. Part Number: 415csa Weight: 3 lbs |
|
Price: $55.00 |
Add To Cart
|
|
|
|
Dash Mirror |
|
|
Original Cobra design, polished and chrome plated. Part Number: 9011 Weight: 1 lbs |
|
Price: $20.00 |
Add To Cart
|
|
|
|
Door Latches Kit |
|
|
Original Cobra door latches patented in the late 19th Century for carriages. These have a smooth double step latching mechanism that is still popular today. Part Number: 9002da Weight: 7 lbs |
|
Price: $185.00 |
Add To Cart
|
|
|
|
Double Tube Lower A-Arms |
|
|
Bolts into the Mustang II based crossmember & works in conjunction with the original spindle & strut rods. 1" dropped mounting utilizes our popular coilover shock. Part Number: 4042d Weight: 14 lbs |
|
Price: $275.00 |
Add To Cart
|
|
|
|
Double U-Joint Steering Shaft Assembly |
|
|
Lower steering sector designed to work with the Shell Valley steering column (double D shaft) and a manual Mustang II rack & pinion. Comes with a heim joint in the center section for support
NOTE: Can also be made to accept a 3/4" round upper and /or a Mustang II power rack lower. Call for custom applications. Part Number: 8086 Weight: 4 lbs |
|
Price: $145.00 |
Add To Cart
|
|
|
|
Dust Cap Kit |
|
|
Fits Mustang II rotor. Includes tooth washers, nut retainers, and cotter pins. Part Number: 4050 Weight: 1 lbs |
|
Price: $15.00 |
Add To Cart
|
|
|
|
Electric Fans |
|
|
16" diameter 12 volt fans. Heavy duty motor moves high volumes of air. Part Number: 3038fh Weight: 9 lbs |
|
Price: $129.00 |
Add To Cart
|
|
|
|
Floor Mats |
|
|
Set of two black plush carpet with white lettering. Fits the NEW Generation II Shell Valley and Midstates cars with dropped foot boxes. Part Number: 9095FL Weight: 5 lbs |
|
Price: $95.00 |
Add To Cart
|
|
|
|
Fresh Air Vents |
|
|
Can be installed around foot box area or firewall. 3" diameter. Part Number: 8183 Weight: 1 lbs |
|
Price: $17.00 |
Add To Cart
|
|
|
|
Front Oval Bumper |
|
|
Original Chrome plated Cobra dimension. Side mounting plates adapt to the side of the bumper overriders. Part Number: 9007 Weight: 14 lbs |
|
Price: $197.00 |
Add To Cart
|
|
|
|
Fuel Line |
|
|
Aluminum 3/8" fuel line runs from the gas tank to the fuel pump. Mounting clips and flex hose included. Part Number: 3041 Weight: 1 lbs |
|
Price: $45.00 |
Add To Cart
|
|
|
|
Fuel Sender |
|
|
Universal design to be used with a variety of gas tank depths. Part Number: 3040f Weight: 1 lbs |
|
Price: $45.00 |
Add To Cart
|
|
|
|
Fuel Sending unit |
|
|
Camero style electric tank mounted fuel sending unit. For use with Shell Valley and Midstates fuel tanks Part Number: 3040S Weight: 3 lbs |
|
Price: $125.00 |
Add To Cart
|
|
|
|
Gas Cap Assembly |
|
|
Original flip top design with threaded collar and 2" fill neck. Part Number: 9009 Weight: 2 lbs |
|
Price: $155.00 |
Add To Cart
|
|
|
|
Gas Fill Hose |
|
|
Gasoline approved 1 1/2" I.D.or 2" I.D. hose. Fits between the gas cap and the gas tank. Part Number: 3041h112 Weight: 1 lbs |
|
Price: $30.00 |
Add To Cart
|
|
|
|
Gas Pedal Assembly |
|
|
Bolts into top inside corner of footbox. Includes bell crank for firewall, rod linkage, and rod ends. Part Number: 3040gp Weight: 2 lbs |
|
Price: $125.00 |
Add To Cart
|
|
|
|
Gas Pedal cable style |
|
|
Attractive chrome easily adjustable gas pedal with rubber pad and cable operated. Part Number: 3040GPCS Weight: 3 lbs |
|
Price: $125.00 |
Add To Cart
|
|
|
|
Gas Tank |
|
|
Custom Cobra gas tank. Holds 16 Gallons Part Number: 3040A Weight: 75 lbs |
|
Price: $360.00 |
Add To Cart
|
|
|
|
Glove Box Compartment |
|
|
A popular glove box for the Cobra replicas. Molded Thermoplastic black in color. Keyed lock and hinges. Part Number: 8082 Weight: 3 lbs |
|
Price: $249.00 |
Add To Cart
|
|
|
|
GM Intermediate Calipers |
|
|
Rebuilt large single piston caliper. Includes flex hoses, fluid bolts and mounting bolts. Mounts to Granada adapter kit. Part Number: 4048gc Weight: 26 lbs |
|
Price: $199.00 |
Add To Cart
|
|
|
|
Granada Adapter Kit |
|
|
Mounts Granada 11" rotors to Mustang II spindles. Uses GM calipers. Part Number: 4048ga Weight: 5 lbs |
|
Price: $79.00 |
Add To Cart
|
|
|
|
Granada Rotors |
|
|
Fits Mustang II spindle and uses our in stock bearing and seal kit. 11" in diameter. Part Number: 4048g Weight: 50 lbs |
|
Price: $129.00 |
Add To Cart
|
|
|
|
Halibrand Replica Wheels |
|
|
Beautiful reproductions of the original Halibrand pin-drives. Available in 15" or 17" plus several widths and offsets. Includes valve stems, lug nuts and center caps or spinners. Part Number: wheel01 Weight: 88 lbs |
|
Price: $1,500.00 |
Add To Cart
|
|
|
|
Handbrake Assembly |
|
|
Includes handle and cables. Plus the necessary brackets to properly install this unit into the Cobra. Part Number: 3037 Weight: 3 lbs |
|
Price: $145.00 |
Add To Cart
|
|
|
|
Header Bend Kit |
|
|
V-8 header kit allows you to make a custom exhaust system. Flanges and bends (Specify application). Part Number: 303427 Weight: 26 lbs |
|
Price: $225.00 |
Add To Cart
|
|
|
|
Headers |
|
|
Headers designed to slip fit into side pipes. Available for any small or big block Ford or Chevy V-8. Unfinished.
Please specify header size in the comment section of order form. Part Number: header Weight: 30 lbs |
|
Price: $395.00 |
Add To Cart
|
|
|
|
Headlight Assy |
|
|
Made in England, original design includes chrome plated headlight rim and bulb. Part Number: 9001h Weight: 4 lbs |
|
Price: $149.00 |
Add To Cart
|
|
|
|
Heater and Defrost Kit |
|
|
Compact to fit most applications. With defrost ducts, grills, and hose. Water hookups and 12 volt fan built in. Part Number: 8092a Weight: 10 lbs |
|
Price: $335.00 |
Add To Cart
|
|
|
|
Hinge Assembly |
|
|
This assembly allows you to mount your hood or trunk on the underside. Please specify in the coments if you need Hood or Trunk. Part Number: C8080H Weight: 8 lbs |
|
Price: $75.00 |
Add To Cart
|
|
|
|
Hinges |
|
|
Formed cold roll steel tubing with weld-on adjustable mounting plates. Use on doors, hood and trunk. Part Number: 8080 Weight: 2 lbs |
|
Price: $35.00 |
Add To Cart
|
|
|
|
Hood Handles and Latches |
|
|
Stylish chrome plated original design. Why use hood pins when you could use these. Part Number: 9002ha Weight: 2 lbs |
|
Price: $75.00 |
Add To Cart
|
|
|
|
Hood Scoop |
|
|
Our fiberglass hood scoop is designed for extra clearance or that "rivet on" look. Easy to install and the high gloss gelcoat is ready to finish.
Note:24"x15.5"x3.25"
Part Number: 7070HSS Weight: 7 lbs |
|
Price: $75.00 |
Add To Cart
|
|
|
|
Hood scoop Tall |
|
|
Our tall fiberglass hood scoop is designed for extra clearance or that "rivet on" look. Easy to install and the high gloss gelcoat is ready to finish.
Note: 31.5"x18.5"x3.5" Part Number: 7070HS Weight: 7 lbs |
|
Price: $75.00 |
Add To Cart
|
|
|
|
Hood Support |
|
|
Assembly includes rod mounting bracket and metal rod with nut and washers. Rod hold down clip included. Part Number: 9017 Weight: 2 lbs |
|
Price: $25.00 |
Add To Cart
|
|
|
|
Horn and Button |
|
|
12 volt high pitch sounding, Black and white push button switch mounts into dash. Part Number: 8091 Weight: 2 lbs |
|
Price: $39.00 |
Add To Cart
|
|
|
|
Hot Rod & Kit Car I.F.S Crossmember |
|
|
Accepts Mustang II based suspensions. Universal design can be easily installed into most frames. Strut rod mounts included. Part Number: 4052 Weight: 20 lbs |
|
Price: $325.00 |
Add To Cart
|
|
|
|
License Plate Light |
|
|
Chrome plated original Cobra design. Part Number: 9001lpl Weight: 1 lbs |
|
Price: $29.00 |
Add To Cart
|
|
|
|
Manifold Mount Overflow Tank |
|
|
Original Cobra design overflow tank mounts directly to the intake manifold. Solder in neck allows positioning of the tank for clearance. Part Number: 3039m Weight: 4 lbs |
|
Price: $325.00 |
Add To Cart
|
|
|
|
Master Cylinder |
|
|
B.G.F. Master Cylinder available in 3/4" bore. Has 5/16" N.F. push rod and aluminum caps. Part Number: 3035mc Weight: 2 lbs |
|
Price: $49.00 |
Add To Cart
|
|
|
|
Mustang II Brake Line Hoses |
|
|
Attaches to original Mustang II Calipers and joing to 3/16" hard brake line. Brake hose clips included. Part Number: 4051 Weight: 2 lbs |
|
Price: $35.00 |
Add To Cart
|
|
|
|
Mustang II Rack and Pinion |
|
|
Brand new with polished center tube. 4 1/2 turns lock to lock. Inlcudes 2 mounting bushings, 2 tie rod ends. Part Number: 4047s Weight: 18 lbs |
|
Price: $199.00 |
Add To Cart
|
|
|
|
Mustang II Spindles |
|
|
New! Original dimension spindles. Figure your time to pull these out of a junk car. Then order these ready to bolt on from us. Part Number: 4043 Weight: 16 lbs |
|
Price: $199.00 |
Add To Cart
|
|
|
|
Oil Cooler |
|
|
Original style Mocal oil cooler. Comes with 10' of braided stainless hose and fittings at the cooler Part Number: 1999 Weight: 10 lbs |
|
Price: $350.00 |
Add To Cart
|
|
|
|
Parking Lights |
|
|
Amber wing tip lenses with chrome bezels. Double filament bulbs. Part Number: 9001ts Weight: 1 lbs |
|
Price: $75.00 |
Add To Cart
|
|
|
|
Pedal Pads |
|
|
Black rubber same as used on our brake, gas, & clutch pedals. Part Number: 3035p Weight: 1 lbs |
|
Price: $5.00 |
Add To Cart
|
|
|
|
Quick-Jack Racing Bumbers |
|
|
Reproduction of the original racing type bumpers used on competition Cobras. Pre-formed heavy gauge steel. Raw Part Number: 9006qj Weight: 10 lbs |
|
Price: $150.00 |
Add To Cart
|
|
|
|
Quick-Jack Racing Bumpers |
|
|
Reproduction of the original racing type bumpers used on competition Cobras. Pre-formed heavy gauge steel. Chrome. Part Number: 9006qjc Weight: 10 lbs |
|
Price: $275.00 |
Add To Cart
|
|
|
|
Radiator Fill Neck |
|
|
Cast Aluminum filler neck slips into top radiator hose for ease in filling the cooling system. Part Number: 3038fn Weight: 1 lbs |
|
Price: $50.00 |
Add To Cart
|
|
|
|
Rear Disc Brake Kit - SVO |
|
|
Kit includes 11" rotors, calipers, mounting brackets and attaching hardware. Rotors are 5 on 4 1/2 diameter passenger car bolt pattern. Part Number: 5054 Weight: 55 lbs |
|
Price: $499.00 |
Add To Cart
|
|
|
|
Rear Oval Bumper |
|
|
Chrome plated original style Cobra bumper adds safety and appeal to your Cobra. Part Number: 9008 Weight: 15 lbs |
|
Price: $197.00 |
Add To Cart
|
|
|
|
Rectangular Tail Lights |
|
|
The most popular design for a Cobra replicar. Includes double filament bulb. Part Number: 9001rtl Weight: 2 lbs |
|
Price: $79.00 |
Add To Cart
|
|
|
|
Round Light |
|
|
Lucas round taillight/marker light. Available Amber, clear or red. Sold ea. Part Number: 9001RD Weight: 3 lbs |
|
Price: $45.00 |
Add To Cart
|
|
|
|
Seat Belt bracket |
|
|
Mounts your shoulder harness on the roll bar for that vintage racing look. For use with individual style shoulder harness (Part #2000) and clip-in conversion kit (Part #2002C) Part Number: 2002 Weight: 10 lbs |
|
Price: $179.00 |
Add To Cart
|
|
|
|
Seat Belt Combo Kit |
|
|
Quality nylon double stitched for extral strength. All belts are dated to meet or surpass SCCA and other racing specifications. SFI certified. Features deluxe 3" lapbelt with single sub belt and individual shoulder harness. Available in red,blue or black Part Number: 2000 Weight: 10 lbs |
|
Price: $90.00 |
Add To Cart
|
|
|
|
Seat Tracks |
|
|
Adjustable forward or back with low profile design. Bolts to seat bottom and car floor board. Part Number: 9093 Weight: 5 lbs |
|
Price: $39.00 |
Add To Cart
|
|
|
|
Seatbelt clip-in Conversion kit |
|
|
Convert your harness from bolt-in to Clip-in. For use with roll bar mount Seatbelt bracket (Part #2002) Part Number: 2002C Weight: 3 lbs |
|
Price: $29.00 |
Add To Cart
|
|
|
|
Seats - Leather |
|
|
Upholstered seats nicely padded with 3 different densities of foam for extra comfort. Handsewn pleats with raised front cushion makes a non-slip relaxing seat! sold in pairs Part Number: C9091L Weight: 70 lbs |
|
Price: $1,299.00 |
Add To Cart
|
|
|
|
Seats - Vinyl |
|
|
Upholstered seats nicely padded with 3 different densities of foam for extra comfort. Handsewn pleats with raised front cushion makes a non-slip relaxing seat! sold in pairs Part Number: C9091O Weight: 70 lbs |
|
Price: $599.00 |
Add To Cart
|
|
|
|
Side Mirror |
|
|
Original Cobra design. Can be used on both driver and passenger side. Part Number: 9012 Weight: 1 lbs |
|
Price: $39.00 |
Add To Cart
|
|
|
|
Side Pipes |
|
|
Side pipe exhaust system to fit 90" wheelbase Cobra. Design for slip-fit headers into 2" I.D. side-pipe opening. Unfinished. Part Number: 3031u Weight: 70 lbs |
|
Price: $595.00 |
Add To Cart
|
|
|
|
Side Pipes |
|
|
Side pipe exhaust system to fit 90" wheelbase Cobra. Design for slip-fit headers into 2" I.D. side-pipe opening. Finished and Chromed. Part Number: 3031c Weight: 70 lbs |
|
Price: $995.00 |
Add To Cart
|
|
|
|
Side Vent Louvers |
|
|
Stainless steel construction. Placing these into the sides of your car helps move heat out from under the hood. Can be hand formed to the angle of preference. Part Number: 8088 Weight: 2 lbs |
|
Price: $116.00 |
Add To Cart
|
|
|
|
Stamped Lower A-Arms |
|
|
Orginal dimension of the Mustang II Pinto allows use of the stock coil spring. Baked enamel finish. Part Number: 40420 Weight: 16 lbs |
|
Price: $149.00 |
Add To Cart
|
|
|
|
Stamped Upper A-Arms |
|
|
Original dimension, direct replacement of the Mustang II Pinto A-Arm. Baked enamel finish, fully assembled as shown Part Number: 40410 Weight: 12 lbs |
|
Price: $149.00 |
Add To Cart
|
|
|
|
Steering Column Assembly |
|
|
Complete with lower double u-joint and double D knuckle. Splined knuckles Slide over stock Mustang II/Pinto non-power rack and pinion. Brackets and gromet to finish off inside. Part Number: 8084 Weight: 25 lbs |
|
Price: $495.00 |
Add To Cart
|
|
|
|
Steering Shaft or Tubing |
|
|
3/4" I.D. DOM steering shaft tubing, 3 feet long. Part Number: 8084t Weight: 3 lbs |
|
Price: $18.00 |
Add To Cart
|
|
|
|
Steering Wheel |
|
|
9-Bolt 15" reproduction steering wheel. Part Number: 9014 Weight: 3 lbs |
|
Price: $150.00 |
Add To Cart
|
|
|
|
Steering Wheel Adapter |
|
|
Beatiful finished 9 bolt adapter including horn button is designed to adapt today's steering column to the nostolgic original style steering wheel. Comes with bolts and hardware. Please specify in the "comments" section Ford or GM splines Part Number: 9014A Weight: 2 lbs |
|
Price: $65.00 |
Add To Cart
|
|
|
|
Strut Eliminator System |
|
|
Tubular Mustang II suspension system eliminates the need for strut rods. Includes tubular upper a-arms, tubular strut-eliminator lower a-arms, coliover shocks with springs, and spindles. Part Number: strut Weight: 60 lbs |
|
Price: $1,195.00 |
Add To Cart
|
|
|
|
Strut Rod Eliminator A-Arms |
|
|
Wide body design comes with through crossmember bolts, weld in spacers, & gussets. Uses coilover shocks & Mustang II spindles. Powder Coated Black. Part Number: 4042w Weight: 12 lbs |
|
Price: $335.00 |
Add To Cart
|
|
|
|
Strut Rods with Bolts |
|
|
Same as Mustang II OEM Part Number: 4044 Weight: 4 lbs |
|
Price: $115.00 |
Add To Cart
|
|
|
|
Tie Rod Ends |
|
|
Fits the Mustang II rack and pinion, all hardware included. Part Number: 4047t Weight: 2 lbs |
|
Price: $30.00 |
Add To Cart
|
|
|
|
Tinted Sunvisors |
|
|
Mount to drilled and tapped holes in top of windshield frame. Peel away protective coating. With hinged brackets. Part Number: 9016 Weight: 2 lbs |
|
Price: $75.00 |
Add To Cart
|
|
|
|
Toy Replica |
|
|
Toy Cobra replica, opening hood and doors. This car also has pull back and release fun for kids of ALL ages. Car is approx. 6" long.
FREE shipping.
Please specify in the comment section Blue,Red,Yellow,Black,Maroon or green. Part Number: C006 Weight: 0 lbs |
|
Price: $15.00 |
Add To Cart
|
|
|
|
Transmission Mount |
|
|
Dropped universal design for a variety of applications Part Number: 1013 Weight: 7 lbs |
|
Price: $65.00 |
Add To Cart
|
|
|
|
Triangulated 4-Link Rear Suspension |
|
|
Our Kit includes all the brackets to install the 4-bar suspension to your rear-end, including coil-over mounts, and our exclusive polished aluminum radius arms. Urethane bushings and steel sleeves for 5/8" bolts also included. Part Number: 5051 Weight: 12 lbs |
|
Price: $275.00 |
Add To Cart
|
|
|
|
Trunk Handle and Latch |
|
|
Chrome plated handle with lock and keys. Latch has built-in hook to hold down the trunk lid. Part Number: 9002ta Weight: 2 lbs |
|
Price: $35.00 |
Add To Cart
|
|
|
|
T-Shirt |
|
|
NEW!!!! Shell Valley / Midstates t-shirt! Please specify in comments section M,L,XL or 2XL (Other sizes available on request)
FREE SHIPPING! Part Number: C001 Weight: 0 lbs |
|
Price: $20.00 |
Add To Cart
|
|
|
|
Tubular Upper A-Arms |
|
|
The most popular A-Arm among the street rod & kit car industry. This sleek unit comes with the ball joint & cross-shaft installed. Direct replacement for the Mustang II based front crossmembers. Powder Coated Black. Part Number: 4041n Weight: 12 lbs |
|
Price: $275.00 |
Add To Cart
|
|
|
|
Turn Signal Switch |
|
|
Easily adapts to custom steering columns for a sleek, slender look. Has self canceling left and right turning. Headlight dimmer switch is built into handle. Part Number: 8084s Weight: 2 lbs |
|
Price: $145.00 |
Add To Cart
|
|
|
|
Unchromed Roll Bar (single) |
|
|
Original design w/rear mounted third leg. Includes rubber body grommets and mounting brackets. 2" OD 12" center to center Part Number: 9017r Weight: 24 lbs |
|
Price: $300.00 |
Add To Cart
|
|
|
|
Upholstered Door Panels |
|
|
Leather padded door panels with handsewn pleats. A great compliment to our upholstered seats. Fits Generation II and Midstates cars. Part Number: 9094L Weight: 5 lbs |
|
Price: $425.00 |
Add To Cart
|
|
|
|
Upholstered Door Panels |
|
|
Vinyl padded door panels with handsewn pleats. A great compliment to our upholstered seats. Fits Generation II and Midstates cars. Part Number: 9094O Weight: 5 lbs |
|
Price: $275.00 |
Add To Cart
|
|
|
|
VDO Gauges with Indicator Lights |
|
|
Includes 6 illuminated guages - oil pressure, fuel, speedometer w/trip meter,tach, voltage and water temperature. Package includes senders, turn signal & high beam lights. Part Number: 9010 Weight: 10 lbs |
|
Price: $445.00 |
Add To Cart
|
|
|
|
Weatherstrip Kit |
|
|
Complete package for sealing doors and trunk lid. With hood bumpers. Part Number: 8089 Weight: 1 lbs |
|
Price: $75.00 |
Add To Cart
|
|
|
|
Wheels |
|
|
original style wheels with adaptors. Giving you the real knock off design. sizes are front 15" x 7 1/2" and rear is 15" x 9 1/2". Part Number: 2-20ko Weight: 112 lbs |
|
Price: $2,800.00 |
Add To Cart
|
|
|
|
Windshield |
|
|
Chrome plated brass windshield with safety tinted glass and base weather seal. Part Number: 9003w Weight: 80 lbs |
|
Price: $795.00 |
Add To Cart
|
|
|
|
Windshield Replacement Glass |
|
|
Safety tinted glass to fit Cobra style windshield frames. Part Number: 9003rg Weight: 80 lbs |
|
Price: $475.00 |
Add To Cart
|
|
|
|
Windshield Surround Plates |
|
|
Finish off the hole in the Cobra replica body where the windshield drops in. Original formed beveled design of aluminum. Part Number: 9004 Weight: 1 lbs |
|
Price: $20.00 |
Add To Cart
|
|
|
|
Windshield Wiper Assembly |
|
|
Cable drive wiper motor allows flexible movement in placing of the wiper post. Includes new motor, new arms, blades, and mounting brackets. Part Number: 9005 Weight: 8 lbs |
|
Price: $485.00 |
Add To Cart
|
|
|
|
Windwings |
|
|
Mount to side of Cobra replica windshield. Peel away protective coating. Complete with hinge brackets. Part Number: 9015 Weight: 4 lbs |
|
Price: $75.00 |
Add To Cart
|
|
|
|
Wiring Harness |
|
|
Ford Wiring Harness - Includes regulator, prewired ignition, headlight switches & easy to follow instructions. Part Number: 3042f Weight: 12 lbs |
|
Price: $475.00 |
Add To Cart
|
|
|
|
